| Version | Wega 501 FDW |
| Setting range for welding current | 50 A – 500 A |
| Duty cycle 40 °C | 500 A / 60 % |
| 400 A / 100 % | |
| Open circuit voltage | 16.5 V |
| Mains voltage | 3 x 400 V |
| Tolerances | -25 % up to +20 % |
| Mains frequency | 50 Hz / 60 Hz |
| Recommended generator power | 35.5 kVA |
| Kühlleistung bei 1 l/min | 1.5 kW |
| Pump pressure | 3.5 bar |
| Protection classification | IP23 |
| Safety marking |  |
| EMC class | A |
| Standards | IEC 60974-1, -2, -10 CL.A |
Wega 501 FDW
- Step switch controlled MIG/MAG welding machine, decompact, water-cooled
- Wire feeder, water-cooled, Euro torch connector, Wega M1.02 drive 41L
- Intermediate hose package, water-cooled, 7-pole, 1 m
- MIG/MAG welding torch, water-cooled, 4 m
- Workpiece lead with clamp, 550 A , 60 %, 95 mm²
- Mains plug, assembled,
- Pressure regulator with manometer, 30 l
- Coolant up to -10 °C (14 °F), 5 l,
Enquiry about Wega 501 FDW
Please fill all the fields to complete your enquiry.
Thank you for your enquiry. We will get back to you soon.
