| Version | Wega 601 FDW |
| Setting range for welding current | 50 A – 600 A |
| Duty cycle 40 °C | 600 A / 45 % |
| 450 A / 100 % | |
| Open circuit voltage | 16.5 V |
| Mains voltage | 3 x 400 V |
| Tolerances | -25 % up to +20 % |
| Mains frequency | 50 Hz / 60 Hz |
| Recommended generator power | 47.9 kVA |
| Kühlleistung bei 1 l/min | 1.2 kW |
| Pump pressure | 3.5 bar |
| Tank capacity | 12.5 l |
| Protection classification | IP23 |
| Safety marking |  |
| EMC class | A |
| Dimensions (L x B x H) | 1095 mm x 554 mm x 1001 mm |
| 43.11 Zoll x 21.811 Zoll x 39.409 Zoll | |
| Standards | IEC 60974-1, -2, -10 CL.A |
Wega 601 FDW
- Step switch controlled MIG/MAG welding machine, decompact, water-cooled
- Wire feeder, water-cooled, Euro torch connector, Wega M1.02 drive 41L
- Intermediate hose package, water-cooled, 7-pole, 1 m
- MIG/MAG welding torch, water-cooled, 4 m
- Workpiece lead with clamp, 550 A , 60 %, 95 mm²
- Mains plug, assembled,
- Pressure regulator with manometer, 30 l
- Coolant up to -10 °C (14 °F), 5 l
Enquiry about Wega 601 FDW
Please fill all the fields to complete your enquiry.
Thank you for your enquiry. We will get back to you soon.
