| Duty cycle CO2 | 500 A / 100 % |
| Duty cycle M21 | 450 A / 100 % |
| Duty cycle M21 pulse | 350 A / 100 % |
| Wire Ø | 0.8 mm – 1.6 mm |
| Connection poles | Euro torch connector, 19-pole |
| Connection | Euro torch connector |
| Thread, contact tip | M9 |
| Hose package length | 3 m |
| Bend angle torch neck | 45 ° |
| Approvals |  |
MT451CW 2U/D M9 3m
- Water-cooled MIG/MAG function torch with replaceable neck (torch neck rotatable through 360°)
- Best ignition characteristics even with thin wires
- Ergonomically formed grip to take the strain out of work
- Program and JOB selection
- Suitable for all EWM welding machines with Euro torch connector and 19-pole connection socket
- Recommendation:
- For feeding steel wires, we recommend using a steel liner with a capillary tube
- For feeding CrNi, aluminium, flux-cored and CuSi wires, we recommend a PA combined liner with a guide tube (alternatively you can use a Teflon or carbon Teflon liner)
- Equipment as supplied (steel wire Ø 1.2 mm):
- Gas nozzle Ø 15 mm; 71 mm
- Gas diffuser Ø 17 mm; 14 mm
- Contact tip M9 x 35 mm; Ø 1.2 mm and contact tip holderM9 x 34.5 mm
- Worn o-rings have a negative impact on the welding torch cooling. Insufficient cooling causes damage to the welding torch. Check and if necessary grease or replace all o-rings when converting the welding torch! Please note spare parts list in the “Push/pull welding torches” chapter.
- Steel liner red; Ø 2 mm x 4.6 mm
Enquiry about MT451CW 2U/D M9 3m
Please fill all the fields to complete your enquiry.
Thank you for your enquiry. We will get back to you soon.
