MT451CW U/D M9 3m

  • Water-cooled MIG/MAG function torch with replaceable neck (torch neck rotatable through 360°)
  • Best ignition characteristics even with thin wires
  • Ergonomically formed grip to take the strain out of work
  • Program selection also available as an option
  • Suitable for all EWM welding machines with Euro torch connector and 19-pole connection socket (except for Picomig 355 and Taurus Basic)
  • Recommendation:
  • For feeding steel wires, we recommend using a steel liner with a capillary tube
  • For feeding CrNi, aluminium, flux-cored and CuSi wires, we recommend a PA combined liner with a guide tube (alternatively you can use a Teflon or carbon Teflon liner)
  • Equipment as supplied (steel wire Ø 1.2 mm):
  • Gas nozzle Ø 15 mm; 71 mm
  • Gas diffuser Ø 17 mm; 14 mm
  • Contact tip M9 x 35 mm; Ø 1.2 mm and contact tip holderM9 x 34.5 mm
  • Worn o-rings have a negative impact on the welding torch cooling. Insufficient cooling causes damage to the welding torch. Check and if necessary grease or replace all o-rings when converting the welding torch! Please note spare parts list in the “Push/pull welding torches” chapter.
  • Steel liner red; Ø 2 mm x 4.6 mm
Download PDF
Category:
Duty cycle CO2 500 A / 100 %
Duty cycle M21 450 A / 100 %
Duty cycle M21 pulse 350 A / 100 %
Wire Ø 0.8 mm – 1.6 mm
Connection poles Euro torch connector, 19-pole
Connection Euro torch connector
Thread, contact tip M9
Hose package length 3 m
Bend angle torch neck 45 °
Approvals