Version | Phoenix 551 Progress puls MM FDW |
Setting range for welding current | 5 A – 550 A |
Duty cycle 40 °C | 550 A / 60 % |
420 A / 100 % | |
Open circuit voltage | 79 V |
Mains voltage | 3 x 400 V |
Tolerances | -25 % up to +20 % |
Mains frequency | 50 Hz / 60 Hz |
Recommended generator power | 39.4 kVA |
Kühlleistung bei 1 l/min | 1.5 kW |
Pump pressure | 3.5 bar |
Tank capacity | 12.5 l |
Protection classification | IP23 |
Safety marking | |
EMC class | A |
Dimensions (L x B x H) | 1085 mm x 450 mm x 1003 mm |
42.717 Zoll x 17.717 Zoll x 39.488 Zoll | |
Weight | 129 kg |
284.445 lbs | |
Standards | IEC 60974-1, -2, -10 CL.A |
Phoenix 551 Progress puls MM FDW
- Water-cooled MIG/MAG inverter welding machine, pulse, with separate wire feeder; choice between drive 4X EX, drive 4X HP or drive 4X LP
- Welding procedures and functions
- Equipped at no extra charge with EWM Synergic characteristics for forceArc, forceArc puls, rootArc, rootArc puls and superPuls
- Equipped at no extra charge with Synergic characteristics for GMAW welding of steel/CrNi/aluminium
- Suitable for MMA welding, TIG welding and gouging at no extra charge
- 16 individually configurable programmes for each welding task (JOB)
- Infinitely adjustable arc dynamics (choke effect)
- Adjustable start and end-crater functions
- Synergic or manual welding operation
- Your benefits
- High-precision, powerful EWM eFeed 4-roll wire feed mechanism for secure feeding of all solid and flux cored wires
- Equipped with 1.0–1.2 mm UNI rolls for low to high-alloy steel
- Energy-saving thanks to high efficiency and standby function
- Easy, tool-free change of welding polarity
- Earth fault monitoring (PE protection)
- Connection capability for remote control and function torch
- Optional network connectivity with ewm Xnet software via LAN or WiFi gateway
- PC interface for PC300 XQ software
- Excellent torch cooling, resulting in cost savings on consumables due to high-performance centrifugal pump and 12-litre water tank
- Free WPQR package for certification up to and including EXC2 in accordance with EN 1090 and for welding of unalloyed steels up to and including S355