Version | Taurus 505 Basic TDM |
Setting range for welding current | 5 A – 500 A |
Duty cycle 40 °C | 500 A / 60 % |
430 A / 100 % | |
Open circuit voltage | 79 V |
Mains voltage | 3 x 400 V |
Tolerances | -25 % up to +20 % |
Mains frequency | 50 Hz / 60 Hz |
Recommended generator power | 33.2 kVA |
Protection classification | IP23 |
Safety marking | ![]() |
EMC class | A |
Dimensions (L x B x H) | 625 mm x 298 mm x 531 mm |
24.606 Zoll x 11.732 Zoll x 20.906 Zoll | |
Weight | 44.2 kg |
Standards | IEC 60974-1, -10 CL.A |
Taurus 505 Basic TDM
- Inverter welding machine with separate drive 4 Basic wire feeder and Basic control
- Welding procedures and functions
- Manual twin-knob operation (welding voltage and wire feeding)
- Suitable for GMAW welding of steel/CrNi/aluminium at no extra charge
- Suitable for MMA welding and gouging at no extra charge
- Infinitely adjustable arc dynamics (choke effect)
- Your benefits
- Gas-cooled or optionally water-cooled with cool 50 cooling unit
- High-precision, powerful EWM eFeed 4-roll wire feed mechanism for secure feeding of all solid and flux cored wires
- Equipped with 1.0–1.2 mm UNI rolls for low to high-alloy steel
- Energy-saving thanks to high efficiency and standby function
- Easy, tool-free change of welding polarity
- Earth fault monitoring (PE protection)
- IP23 spray water protected
- Connection capability for remote control and function torch
- Excellent torch cooling, resulting in cost savings on consumables due to high-performance centrifugal pump and 5-litre water tank (cool50 cooling unit)