Water-cooled MIG/MAG function torch with replaceable neck (torch neck rotatable through 360°)
Best ignition characteristics even with thin wires
Ergonomically formed grip to take the strain out of work
Program and JOB selection
MT function torch with X technology only suitable for Titan XQ puls, EWM MULTIMATRIX or Taurus Steel welding machines
If the welding torch is connected to third-party machines or welding machines without MULTIMATRIX technology, welding is not possible
Safe and rugged; without control cable and additional connector plug
For feeding steel wires, we recommend using a steel liner with a capillary tube
For feeding CrNi, aluminium, flux-cored and CuSi wires, we recommend a PA combined liner with a guide tube (alternatively you can use a Teflon or carbon Teflon liner)
Equipment as supplied (steel wire 1.2 mm):
Gas nozzle Ø 13 mm; 66 mm
Gas diffuser Ø 14.5 mm; 12.5 mm
Contact tip M7 x 30 mm; Ø 1.2 mm and contact tip holder M7 x 31.5 mm
Worn o-rings have a negative impact on the welding torch cooling. Insufficient cooling causes damage to the welding torch. Check and if necessary grease or replace all o-rings when converting the welding torch! Please note spare parts list in the “Push/pull welding torches” chapter.
TRANSYNERGY TECHNOLOGY SDN BHD was incorporated in Malaysia since 2001 and had been serving customers in a wide range of industries. We are specialist provider of digital welding machine. We hold the exclusive sole distributors & agency for few renowned brands of welding products from oversea country. We aspire to be one; seamless company focused on offering a wide range of welding products and services.