MT301CW U/DX M7 3M

• Water-cooled MIG/MAG function torch with replaceable neck (torch neck rotatable through 360°)
• Best ignition characteristics even with thin wires
• Ergonomically formed grip to take the strain out of work
• Program selection also available as an option
• MT function torch with X technology only suitable for Titan XQ puls, EWM MULTIMATRIX or Taurus Steel welding machines
• If the welding torch is connected to third-party machines or welding machines without MULTIMATRIX technology, welding is not possible
• Safe and rugged; without control cable and additional connector plug
• Recommendation:
• For feeding steel wires, we recommend using a steel liner with a capillary tube
• For feeding CrNi, aluminium, flux-cored and CuSi wires, we recommend a PA combined liner with a guide tube (alternatively you can use a Teflon or carbon Teflon liner)
• Equipment as supplied (steel wire 1.2 mm):
• Gas nozzle Ø 13 mm; 66 mm
• Gas diffuser Ø 14.5 mm; 12.5 mm
• Contact tip M7 x 30 mm; Ø 1.2 mm and contact tip holder M7 x 31.5 mm
• Worn o-rings have a negative impact on the welding torch cooling. Insufficient cooling causes damage to the welding torch. Check and if necessary grease or replace all o-rings when converting the welding torch! Please note spare parts list in the “Push/pull welding torches” chapter.
• Steel liner red; Ø 2 mm x 4.6 mm

button open_new_tab=”true” color=”extra-color-1″ hover_text_color_override=”#fff” size=”large” url=”https://transynergy.com.my/wp-content/uploads/2020/06/099-500058-EW501.pdf” text=”Download PDF” color_override=””]