Duty cycle CO2 | 330 A / 100 % |
Duty cycle M21 | 290 A / 100 % |
Duty cycle M21 pulse | 250 A / 100 % |
Wire Ø | 0.8 mm – 1.2 mm |
Connection poles | Euro torch connector |
Connection | Euro torch connector |
Thread, contact tip | M7 |
Hose package length | 3 m |
Bend angle torch neck | 45 ° |
Approvals |
MT301CW PC1X M7 3M
- Water-cooled MIG/MAG function torch with replaceable neck (torch neck rotatable through 360°)
- Best ignition characteristics even with thin wires
- Ergonomically formed grip to take the strain out of work
- Displaying and setting of welding current and wire feed speed
- Program selection also available as an option
- MT function torch with X technology only suitable for Titan XQ puls, EWM MULTIMATRIX or Taurus Steel welding machines
- If the welding torch is connected to third-party machines or welding machines without MULTIMATRIX technology, welding is not possible
- Safe and rugged; without control cable and additional connector plug
- Recommendation:
- For feeding steel wires, we recommend using a steel liner with a capillary tube
- For feeding CrNi, aluminium, flux-cored and CuSi wires, we recommend a PA combined liner with a guide tube (alternatively you can use a Teflon or carbon Teflon liner)
- Equipment as supplied (steel wire 1.2 mm):
- Gas nozzle Ø 13 mm; 66 mm
- Gas diffuser Ø 14.5 mm; 12.5 mm
- Contact tip M7 x 30 mm; Ø 1.2 mm and contact tip holder M7 x 31.5 mm
- Steel liner red; Ø 2 mm x 4.6 mm