Welding range | M3 to M8, dia. 2 to 8 mm / #4 to 5/16“ , dia. 14 ga to 5/16“ Cupped head pins: dia. 2 and 2.7 mm / 14 ga and 12 ga Insulation pins: dia. 2 and 3 mm / 14 ga and #4 |
Welding rate | M3 / #4 = 40 studs/min. (voltage 60 V) M8 / 5/16“ = 14 studs/min. (voltage 200 V) |
Capacitance | 66000 μF |
Welding time | 1 to 3 ms |
Energy | 1600 Ws |
Charging voltage | 50 to 220 V (stepless voltage regulation) |
Primary power | 230 V/115 V*, 50/60 Hz, 10 AT (slow blow) *alternative primary power see „Order No.“ |
Connected load | 600 VA |
Power source | Capacitor |
Cooling type | F (temperature controlled cooling fan) |
IP Code | IP 21 |
Dimension LxWxH (without handle) | 400 x 205 x 250 mm / 15.75“ x 8.07“ x 9.84“ |
Weight | 14 kg / 30.87 lbs |
Suitable guns | PAH-1 |
Order No. | 92-10-1504B (230 V) 92-12-1504B (115 V) 92-13-1504B (100 V) |
CDI 1502 AT
Unbeatable new power pack
- With efficient inverter-capacitor charging technology
- Enormous time and energy savings (30 % less energy!)
- Highest cycle sequence of its class (up to 40 studs/min.)
- 20 % energy reserve due to 220 V charging voltage
- Simple operation & minimal weight (20 % lighter than previous model)
- Extreme long life due to robust and functional industrial design
Highest level of quality and safety
- Capacitor formation recorded – Quality control for consistent capacitor quality through automateed formation
- Shock-proof capacitor battery – No contact of the capacitors to the device housing; sparkover (short cicuit) is therefore not possible!
- Cooling channel – Protects the electronic components from getting soiled. Ideal cooling of the inverter charging p.c. board for high sequence cycles.